0 answers
0 votes
For uniform laminar flow over a flat plate, the thickness of the boundary layer, $\delta$ at a distance $x$ from the leading edge of the plate follows the reaction :$\del...
0 answers
0 votes
The diameters of sand particles in a sample range from $50$ to $150$ microns. The number of particles of diameter x in the sample is proportional to $\frac{1}{50+x}$. The...
0 answers
0 votes
For Fanning friction factor $f$ (for flow in pipes) and drag coefficient $C_{D}$ (for flow over immersed bodies), which of the following statements are true?$P.$ $f$ acco...
0 answers
0 votes
Consider two steady isothermal flow configurations shown schematically as Case $I$ and Case $II$ below. In Case $I$, a $CSTR$ of volume $V_{1}$ is followed by a $PFR$ of ...
0 answers
0 votes
For what value of Lewis number, the wet-bulb temperature and adiabatic saturation temperature are nearly equal?$0.33$$0.5$$1$$2$
0 answers
0 votes
Solute $C$ is extracted in a batch process from its homogenous solution of $A$ and $C$, using solvent $B$. The combined composition of the feed and the extracting solvent...
0 answers
0 votes
A bed of spherical glass beads (density $3000 \text{ kg/m$^3$}$, diameter $1\:\text{mm}$, bed porosity $0.5$) is to be fluidized by a liquid of density $1000 \text{ kg/m$...
0 answers
0 votes
If $v,\:u,\:s$ and $g$ represent respectively the molar volume, molar internal energy, molar entropy and molar Gibbs free energy, then match the entries in the left and r...
0 answers
0 votes
Given that molar residual Gibbs free energy, $g^{R}$, and molar residual volume, $v^{R}$, are related as $\frac{g^{R}}{RT}=\int _{0}^{P}\left ( \frac{v^{R}}{RT} \right )d...
0 answers
0 votes
The liquid phase reversible reaction $A\rightleftharpoons B$ is carried out in an isothermal $CSTR$ operating under steady state conditions. The inlet stream does not con...
0 answers
0 votes
Two infinitely large parallel plates ($I$ and $II$) are held at temperatures $T_{I}$ and $T_{II}$ $(T_{I}>T_{II})$ respectively, and placed at a distance $2d$ apart in va...
0 answers
0 votes
For a binary mixture of components $A$ and $B$, $N_{A}$ and $N_{B}$ denote the total molar fluxes of components $A$ and $B$, respectively. $J_{A}$ and $J_{B}$ are the cor...
0 answers
0 votes
Which of the following can change if only the catalyst is changed for a reaction system?Enthalpy of reactionActivation energyFree energy of the reactionEquilibrium consta...
0 answers
0 votes
Identify the $WRONG$ statement amongst the following:Steam distillation is used for mixtures that are immiscible with water.Vacuum distillation is used for mixtures that ...
0 answers
0 votes
The schematic diagram of a steady state process is shown below. The fresh feed $(F)$ to the reactor consists ot $96$ mol$\%$ reactant $A$ and $4$ mol$\%$ inert $I$. The s...
0 answers
0 votes
A multi-stage, counter-current liquid-liquid extractor is used to separate solute $C$ from a binary mixture $(F)$ of $A$ and $C$ using solvent $B$. Pure solvent $B$ is re...
0 answers
0 votes
An isothermal steady state mixed flow reactor $(CSTR)$ of $1\:m^{3}$ volume is used to carry out the first order liquid-phase reaction $A{\rightarrow}$ products. Fresh fe...
0 answers
0 votes
Match the instruments in $Group–I$ with process variable in $Group–2$.$\begin{array}{cc}\\&\text{Group-1} & \text{Group-2} \\ &\text{P. Conductivity meter} & \text{ I...
0 answers
0 votes
India has no elemental sulphur deposits that can be economically exploited. In India, which one of the following industries produces elemental sulphur as a by-product?Co...
0 answers
0 votes
The impulse response to a tracer pulse experiment or a flow reactor is given below :In the above figure, $C$ is the exit tracer concentration. The corresponding $E$ or $E...
0 answers
0 votes
A vapour phase catalytic reaction $(Q+R{\rightarrow}S)$ follows Rideal mechanism ($R$ and $S$ are not absorbed). Initially, the mixture contains only the reactants in equ...
0 answers
0 votes
The reversible reaction of $t$-butyl alcohol $(TBA)$ and ethanol $(EtOH)$ to ethyl $t$-butyl ether $(ETBE)$ is$$TBA+Et0H\rightleftharpoons ETBE+water$$The equilibrium con...
0 answers
0 votes
An irreversible, homogeneous reaction $A{\rightarrow}$ products, has the rate expression:Rate = $\frac{2C_{A}^{2}+0.1C_{A}}{1+50C_{A}}$, where $C_{A}$ is the concentratio...
0 answers
0 votes
A wet solid of $100\:kg$ is dried from a moisture content of $40\:wt\%$ to $10\:wt\%$. The critical moisture content is $15\:wt\%$ and the equilibrium moisture content is...
0 answers
0 votes
A system exhibits inverse response for a unit step change in the input. Which one of the following statement must necessarily be satisfied?The transfer function of the sy...
0 answers
0 votes
Match the polymer mentioned on the left with the catalyst used for its manufacture given on the right.$\begin{array}{cc}\&\text{I. Low density Polyethylene} & \text{P. Zi...
0 answers
0 votes
Match the chemicals written on the left with the raw materials required to produce them mentioned on the right.$\begin{array}{cc}\&\text{I. Single Superphosephate $(SSP)$...
0 answers
0 votes
A vertical cylindrical tank with a flat roof and bottom is to be constructed for storing $150\:m^{3}$ of ethylene glycol. The cost of material and fabrication for the tan...
0 answers
0 votes
Match the technologies in Group-$1$ with the entries in Group-$2$:$\begin{array}{cc}\&\text{$Group-1$} & \text{$Group-2$} \\ &\text{P. Urea manufacture} & \text{ I. Micro...
0 answers
0 votes
Which one of the following transfer functions, upon a unit step change in disturbance at $t=0$, will show a stable time domain response with a negative initial slope (i.e...
0 answers
0 votes
A step change of magnitude $2$ is introduced into a system having the following transfer function$$G\left ( s \right )=\frac{2}{s^{2}+2s+4}$$The percent overshoot is ____...
0 answers
0 votes
An open tank contains two immiscible liquids of densities $(800\: kg/m^{3}$ and $1000\:kg/m^{3})$ as shown in the figure. If $g = 10\: m/s^2$, under static conditions, th...
0 answers
0 votes
In an experiment setup, mineral oil is filled in between the narrow gap of two horizontal smooth plates. The setup has arrangements to maintain the plates at desired unif...
0 answers
0 votes
In order to produce fine solid particles between $5$ and $10\:\ \mu m$, the appropriate size reducing equipment isfluid energy millhammer milljaw crushersmooth roll crush...
0 answers
0 votes
Determine the correctness or otherwise of the following Assertion $[a]$ and Reason $[r]$Assertion: Significant combustion of coke takes place only if it is heated at high...
0 answers
0 votes
Match the following$$\begin{array}&&\textbf{Group I} & \textbf{Group II} \\ &\text{P. Tank in series model} & \text{I. Non-isothermal reaction}\\&\text{Q. Liquid-liquid ...
0 answers
0 votes
An incompressible fluid is flowing through a contraction section of length $L$ and has a $1-D$ ($x$- direction steady state velocity distribution, $u=u_{0}\left ( 1+\frac...
0 answers
0 votes
Which $ONE$ of the following is $CORRECT$ for an ideal gas in a closed system?$\left ( \frac{\partial U}{\partial V} \right )_{s}V=nR\left ( \frac{\partial U}{\partial S}...
0 answers
0 votes
The vapor-liquid equilibrium curve of a binary mixture A-B,may be approximated by a linear equation over a narrow range of liquid mole fractions (0.2 < x${_A}$ < 0.3) as...
0 answers
0 votes
A binary liquid mixture is in equilibrium with its vapor at a temperature T = 300 K. The liquid mole fraction x${_1}$ of species 1 is 0.4 and the molar excess Gibbs free ...