Recent questions tagged gatech-2023

The enthalpy $\left(H\right.$, in J. $\left.\mathrm{mol}^{-1}\right)$ of a binary liquid system at constant temperature and pressure is given as$$H=40 x_1+60 x_2+x_1 x_2\...

Which one of the following represents the $\text{CORRECT}$ effects of concentration polarization in a reverse osmosis process?Reduced water flux and reduced solute reject...

$\mathrm{CO}$ and $\mathrm{H}_2$ participate in a catalytic reaction. The partial pressures (in atm) of the reacting species $\mathrm{CO}$ and $\mathrm{H}_2$ in the feed ...

A cascade control strategy is shown in the figure below. The transfer function between the output $(y)$ and the secondary disturbance $\left(d_2\right)$ is defined as$$G_...

Level $(h)$ in a steam boiler is controlled by manipulating the flow rate $(F)$ of the make-up (fresh) water using a proportional (P) controller. The transfer function be...

Which of the following statements is/are $\text{CORRECT}$? Bond number includes surface tension. Jakob number includes latent heat. Prandtl number includes liquid-vapor d...

The first derivative of the function$$U(r)=4\left[\left(\frac{1}{r}\right)^{12}-\left(\frac{1}{r}\right)^6\right]$$evaluated at $r=1$ is___________(in integer).

Wet air containing $10$ mole percent water vapor is dried by continuously passing it through a column of $\mathrm{CaCl}_2$ pellets. The pellets remove $50$ percent of wat...

Orsat analysis showing the composition (in $\text{mol} \%,$ on a dry basis) of a stack gas is given in the table below. The humidity measurement reveals that the mole fra...

A pump draws water $\left(\right.$ density $\left.=1000 \mathrm{~kg} \cdot \mathrm{m}^{-3}\right)$ at a steady rate of $10 \mathrm{~kg} \cdot \mathrm{s}^{-1}$. The pressu...

A cylindrical tank with a diameter of $500 \mathrm{~mm}$ contains water (density $=1 \mathrm{~g} \cdot \mathrm{cm}^{-3}$ ) upto a height $h$. A $5 \mathrm{~mm}$ diameter ...

A large tank is filled with water (density $=1 \mathrm{~g} \cdot \mathrm{cm}^{-3}$ ) upto a height of $5 \mathrm{~m}$. A $100 ~ \mu \mathrm{m}$ diameter solid spherical p...

A fluid is flowing steadily under laminar conditions over a thin rectangular plate at temperature $T_s$ as shown in the figure below. The velocity and temperature of the ...

A perfectly insulated, concentric tube countercurrent heat exchanger is used to cool lubricating oil using water as a coolant (see figure below). Oil enters the outer ann...

Partially saturated air at $1 \; \mathrm{bar}$ and $50^{\circ} \mathrm{C}$ is contacted with water in an adiabatic saturator. The air is cooled and humidified to saturati...

Fresh catalyst is loaded into a reactor before the start of the following catalytic reaction.$$\textbf{A} \longrightarrow \textbf{products}$$The catalyst gets deactivated...

A unimolecular, irreversible liquid-phase reaction$$\boldsymbol{A} \longrightarrow \boldsymbol{P}$$was carried out in an ideal batch reactor at temperature $T$. The rate ...

An irreversible liquid-phase second-order reaction$$\boldsymbol{A} \stackrel{k}{\longrightarrow} \boldsymbol{B}$$with rate constant $k=0.2$ liter. $\mathrm{mol}^{-1} \mat...

The outlet concentration $C_A$ of a plug flow reactor $\text{(PFR)}$ is controlled by manipulating the inlet concentration $C_{A 0}$. The following transfer function desc...

The transfer function of a measuring instrument is$$G_m(s)=\frac{1.05}{2 s+1} \exp (-s) .$$At time $t=0$, a step change of $+1$ unit is introduced in the input of this in...

A design engineer needs to purchase a membrane module $(\mathrm{M})$ for a plant. Details about the two available options, $\text{M1}$ and $\text{M2,}$ are given in the t...

The purchase cost of a new distillation column is $\text{Rs. 10 lakhs}$ with an installation factor of $5.8.$ The cost of the capital is to be annualized over a period of...

Pumps $A$ and $B$ are being considered for purchase in a chemical plant. Cost details for these two pumps are given in the table below. The interest rate is $10 \%$ per a...