Most viewed questions in Others

0 answers
0 votes
Which one of the given statements is correct with reference to gas-liquid contactors for mass transfer applications?A tray tower is more suitable for foaming systems than...
0 answers
0 votes
Match the common name of chemicals in $\text{Group-1}$ with their chemical formulae in $\text{Group-2}$$\begin{array}{|l|l|l|l|} \hline & \textbf{Group – 1} & & \textbf...
0 answers
0 votes
For a given binary system at constant temperature and pressure, the molar volume (in $m^{3}$/mol) is given by: $v=30x_{A}+20x_{B}+x_{A}x_{B}\left ( 15x_{A} -7x_{B}\right ...
0 answers
0 votes
The elementary, irreversible liquid-phase, parallel reactions, $2A\rightarrow D$ and $2A\rightarrow U$, take place in an isothermal non-ideal reactor. The $C$-curve measu...
0 answers
0 votes
Match the problem type in Group-$1$ with the numerical method in Group-$2$.$\begin{array}{cc}\&\text{Group-$1$} & \text{Group-$2$} \\ &\text{P. System of linear algebraic...
0 answers
0 votes
A porous pellet with $Pt$ dispersed in it is used to carry out a catalytic reaction. Following two scenarios are possible.$Scenario\:1$ : $Pt$ present throughout the pore...
0 answers
0 votes
Consider a steady state mass transfer process between well-mixed liquid and vapour phases of a binary mixture comprising of components $A$ and $B$. The mole fractions of ...
0 answers
0 votes
The vapor-liquid equilibrium curve of a binary mixture A-B,may be approximated by a linear equation over a narrow range of liquid mole fractions (0.2 < x${_A}$ < 0.3) as...
0 answers
0 votes
The force per unit area (in the $x$ -direction) that must be exerted on the bottom plate to maintain the flow is$\mu V/b$-$\mu V/b$$2\mu V/b$$-2\mu V/b$
0 answers
0 votes
For the enclosure formed between two concentric spheres as shown ($R_2 = 2R_1$), the fraction of radiation leaving the surface area $A_2$ that strikes itself is ...
0 answers
0 votes
The one-dimensional unsteady state heat conduction equation in a hollow cylinder with a constant heat source $q$ is$$ \frac{\partial T}{\partial t}=\frac{1}{r}\frac{\part...
0 answers
0 votes
In a laboratory batch setup, reaction of $P$ over a catalyst was studied at various temperature. The reactions occurring are$$P\rightarrow 2Q\:;\:P\rightarrow R$$At the e...
0 answers
0 votes
​​​​​​A first-order liquid phase reaction $A \rightarrow B$ is carried out in two isothermal plug flow reactors (PFRs) of volume $1 \mathrm{~m}^{3}$ each, con...
0 answers
0 votes
Which one of the following represents the $\text{CORRECT}$ effects of concentration polarization in a reverse osmosis process?Reduced water flux and reduced solute reject...
0 answers
0 votes
Which of the following is $\text{NOT}$ a standard to transmit measurement and control signals?$4-20 \: \text{mA}$$3-15 \text{ psig}$$0-100\: \%$$1-5 \text{ VDC}$
0 answers
0 votes
Consider one mole of an ideal gas in a closed system. It undergoes a change in state from $L$ to $N$ through two different non-isothermal processes, as shown in the $P-V$...
0 answers
0 votes
Two ideal cross-current stages operate to extract $P$ from a feed containing $P$ and $Q$, as shown below.The mass flow rates of $P$ and $Q$ fed to Stage $1$ are $1,000 \:...
0 answers
0 votes
For a non-catalytic homogeneous reaction $A\rightarrow B$, the rate expression at $300\:K$ is $-r_{A}$$\left (mol\; m^{-3} s^{-1}\right )=\frac{10C_{A}}{1+5C_{A}}$...
0 answers
0 votes
Determine the correctness or otherwise of the following Assertion $[a]$ and Reason $[r]$Assertion: Significant combustion of coke takes place only if it is heated at high...
0 answers
0 votes
Match the following$$\begin{array}&&\textbf{Group I} & \textbf{Group II} \\ &\text{P. Tank in series model} & \text{I. Non-isothermal reaction}\\&\text{Q. Liquid-liquid ...
0 answers
0 votes
Which $ONE$ of the following is $CORRECT$ for an ideal gas in a closed system?$\left ( \frac{\partial U}{\partial V} \right )_{s}V=nR\left ( \frac{\partial U}{\partial S}...
0 answers
0 votes
In order to produce fine solid particles between $5$ and $10\:\ \mu m$, the appropriate size reducing equipment isfluid energy millhammer milljaw crushersmooth roll crush...
0 answers
0 votes
Consider the following transfer function $G_p(s) = \dfrac{5}{(2s+1)^4}$(Note: The unit of the processor time constan...
0 answers
0 votes
A binary liquid mixture is in equilibrium with its vapor at a temperature T = 300 K. The liquid mole fraction x${_1}$ of species 1 is 0.4 and the molar excess Gibbs free ...
0 answers
0 votes
The plug flow reactor is replaced by 3 mixed flow reactors in series, each of 2.0 liters volume. The exact conversion of A (in %) is35.952.573.794.8
0 answers
0 votes
The characteristic equation for a system is $S^{3}+9S^{2}+26S+12(2+K{_c}) = 0$.Using the Routh test, the value of $K{_...
0 answers
0 votes
It is decided to extract $A$ from a feed containing $20$ mol$\%$ $A$ and $80$ mol$\%$ $B$ in two ideal cross-current stages as shown below, using equal amount of pure sol...
0 answers
0 votes
Under isothermal condition, a vertical tube of length $L=100\:m$ contains a gas of molecular weight equal to $60$. The pressure and temperature at the top of the tube are...
0 answers
0 votes
Two reservoirs located at the same altitude are connected by a straight horizontal pipe of length $120\:m$ and inner diameter $0.5\:m$, as shown in the figure. A pump tra...
0 answers
0 votes
An elementary irreversıble gas-phase reaction, $A \rightarrow B + C$, is carried out at fixed temperature and pressure in two separate ideal reactors: $(i)$ a $10\:m^{3}...
0 answers
0 votes
A pure gas obeys the equation of state given by $$\dfrac{PV}{RT} = 1 + \dfrac{BP}{RT}$$ where $P$ is the pressure, $T$ is the absolute temperature, $V$ is the molar volum...
0 answers
0 votes
Which of the following is the correct sequence of equipment for size reduction of solids?
0 answers
0 votes
A gas bubble (gas density $\rho_{g} =2\:kg/m^{3}$ ; bubble diameter $D=10^{-4}\:m$ is rising vertically through water (density $\rho =1000\:kg/m^{3}$; viscosity $\mu =0.0...
0 answers
0 votes
A binary distillation column is to be designed using McCabe Thiele method. The distillate contains $90$ mol$\%$ of the more volatile component. The point of intersection ...
0 answers
0 votes
In the McCabe-Thiele diagram, if the $x$-coordinate of the point of intersection of the $q$-line and the vapor-liquid equilibrium curve is greater then the $x$-coordinate...
0 answers
0 votes
For an exothermic reversible reaction, which one of the following correctly describes the dependence of the equilibrium constant $(K)$ with temperature $(T)$ and pressure...
0 answers
0 votes
The vapour pressure of a pure substance at a temperature $T$ is $30$ bar. The actual and ideal gas values of $g/RT$ for the saturated vapour at this temperature $T$ and $...
0 answers
0 votes
An incompressible fluid is flowing through a contraction section of length $L$ and has a $1-D$ ($x$- direction steady state velocity distribution, $u=u_{0}\left ( 1+\frac...
0 answers
0 votes
The gas phase decomposition of azomethane to give ethane and nitrogen takes place according to the following sequence of elementary reactions.(CH${_3}){_2}$N${_2}$ + (CH$...
0 answers
0 votes
Calculate the heat required (in kJ, up to 1 digit after the decimal point) to raise the temperature of 1 mole of a solid material from 100 $^{o}$C to 1000 $^{o}$C. The sp...