0 answers
0 votes
For a flow through a smooth pipe, the Fanning friction factor $(f)$ is given by $f=mRe^{-0.2}$ in the turbulent flow regime, where $Re$ is the Reynolds number and $m$ is ...
0 answers
0 votes
In a cyclone separator used for separation of solid particles from a dust laden gas, the separation factor is defined as the ratio of the centrifugal force to the gravita...
0 answers
0 votes
A vertical cylindrical vessel has a layer of kerosene (of density $800\: kg/m^{3}$) over a layer of water (of density $1000 \:kg/m^{3}$). $L$ – shaped glass tubes are c...
0 answers
0 votes
A composite wall is made of four different materials of construction in the fashion shown below. The resistance (in $K/W$) of each sections of the wall is indicated in th...
0 answers
0 votes
Steam at $100^{\circ}C$ is condensing on a vertical steel plate. The condensate flow is laminar. The average Nusselt numbers are $Nu_{1}$ and $Nu_{2}$, When the plate tem...
0 answers
0 votes
A binary liquid mixture of benzene and toluene contains $20$ mol$\%$ of benzene. At $350 \:K$ the vapour pressures of pure benzene and pure toluene are $92\: kPa$ and $35...
0 answers
0 votes
Match the dimensionless numbers in $Group–I$ with the ratios in $Group–2$.$\begin{array}{cc}\\&\text{Group-1} & \text{Group-2} \\ &\text{P. Biot number} & \text{ I. ...
0 answers
0 votes
For what value of Lewis number, the wet-bulb temperature and adiabatic saturation temperature are nearly equal?$0.33$$0.5$$1$$2$
0 answers
0 votes
For a non-catalytic homogeneous reaction $A\rightarrow B$, the rate expression at $300\:K$ is $-r_{A}$$\left (mol\; m^{-3} s^{-1}\right )=\frac{10C_{A}}{1+5C_{A}}$...
0 answers
0 votes
The variations of the concentration $\left ( C_{A} ,C_{R}\:and\:C_{S}\right )$ for three species $\left ( A,R\:and\:S \right )$ with time, in an isothermal homogeneous ba...
0 answers
0 votes
Hydrogen iodide decomposes through the reaction $2HI\leftrightharpoons H_{_{2}}+I_{2}$. The value of the universal gas constant $R$ is $8.314 \:J\:mol^{-1}K^{-1}$. The ac...
0 answers
0 votes
Match the instruments in $Group–I$ with process variable in $Group–2$.$\begin{array}{cc}\\&\text{Group-1} & \text{Group-2} \\ &\text{P. Conductivity meter} & \text{ I...
0 answers
0 votes
What is the order of response exhibited by a $U$-tube manometer? Zero orderFirst orderSecond orderThird order
0 answers
0 votes
A system exhibits inverse response for a unit step change in the input. Which one of the following statement must necessarily be satisfied?The transfer function of the sy...
0 answers
0 votes
Two design options for a distillation system are being compared based on the total annual cost. Information available is as follows:$$\begin{array}{clcIcIcI|cI|c}\hline&...
0 answers
0 votes
Standard pipes of different schedule numbers and standard tubes of different $BWG$ numbers are available in the market. For a pipe/tube of a given nominal diameter, which...
0 answers
0 votes
Terms used in engineering economics have standard definitions and interpretations. Which one of the following statements is $INCORRECT$?The profitability measure 'return ...
0 answers
0 votes
India has no elemental sulphur deposits that can be economically exploited. In India, which one of the following industries produces elemental sulphur as a by-product?Co...
0 answers
0 votes
Two paper pulp plants $P$ and $Q$ use the same quality of bamboo as a raw material. The chemicals used in their digester are as follows:$$\begin{array}{clcIcI|cI|cI|c}\hl...
0 answers
0 votes
Match the industrial processes in $Group–I$ with the catalyst materials in $Group–2$.$\begin{array}{cc}\\ \\&\text{Group-1} & \text{Group-2} \\ &\text{P. Ethylene po...
0 answers
0 votes
A set of simultaneous linear algebraic equations is represented in a matrix form as shown below.$\begin{bmatrix} 0 &0 &0 &4 &13 \\ 2& 5& 5& 2& 10\\ 0&0 &2 &5 &3 \\ 0&0 &0...
0 answers
0 votes
What is the solution for the second order differential equation $\frac{\mathrm{d} ^{2}y}{\mathrm{d} x}^{2}+y=0$, with the initial conditions $y\left | _{x-0}=5\:and\:\fra...
0 answers
0 votes
The model $y=mx^{2}$ is to be fit to the data given below.$$\begin{array}{|cl|cI|}\hline&{x} & {1} & {\sqrt{2}} & {\sqrt{3}} \\ \hline &{y} & {2} & {5} & {8} \\ \hline \e...
0 answers
0 votes
The Lagrange mean-value theorem is satisfied for $f\left ( x \right )=x^{3}+5$, in the interval $\left ( 1,4 \right )$ at a value (rounded off to the second decimal place...
0 answers
0 votes
Values of $f\left ( x \right )$ in the interval $\left [ 0,4 \right ]$ are given below.$\begin{array}{|cl|cI|cI|cI|cI|cI|}\hline&{x} & \text{0} & \text{1} & \text{2} & \t...
0 answers
0 votes
A jacketed stirred tank with a provision for heat removal is used to mix sulphuric acid and water in a steady state flow process. $H_{2}SO_{4}$ $(l)$ enters at a rate of ...
0 answers
0 votes
An ideal gas is adiabatically and irreversibly compressed from $3$ bar and $300\:K$ to $6$ bar in a closed system. The work required for the irreversible compression is $...
0 answers
0 votes
A gas obeying the Clausius equation of state is isothermally compressed from $5\:Mpa$ to $15\:MPa$ in a closed system at $400\:K$. The Clausius equation of state is $P=\f...
0 answers
0 votes
A binary system at a constant pressure with species $’1’$ and $’2’$ is described by the two-suffix Margules equation, $\frac{g^{E}}{RT}=3x_{1}x_{2}$, where $g^{E}...
0 answers
0 votes
Water (density=$1000\:kg\:m^{-3}$) is pumped at a rate of $36\:m^{3}/h$, from a tank $2\:m$ below the pump, to an overhead pressurized vessel $10\:m$ above the pump. The ...
0 answers
0 votes
An agitated cylinder vessel is fitted with baffles and flat blade impellers. The power number for this system is given by $N_{p}=\frac{P}{\rho n^{3}D^{5}}$ where $P$ is t...
0 answers
0 votes
Consider a rigid solid sphere falling with a constant velocity in a fluid. The following data are known at the conditions of interest: viscosity of the fluid = $0.1\:Pa\;...
0 answers
0 votes
The characteristics curve (Head-Capacity relationship) of a centrifugal pimp is represented by the equation $\Delta H_{pump}=43.8-0.19Q$, where $\Delta H_{pump}$ is the h...
0 answers
0 votes
Water flows through a smooth circular pipe under turbulent conditions. In the viscous sub-layer, the velocity varies linearly with the distance from the wall. The Fanning...
0 answers
0 votes
In a $1-1$ pass shell and tube exchanger, steam is condensing in the shell at a temperature $(T_{s})$ of $135^{\circ}C$ and the cold fluid is heated from a temperature $(...
0 answers
0 votes
In an experiment setup, mineral oil is filled in between the narrow gap of two horizontal smooth plates. The setup has arrangements to maintain the plates at desired unif...
0 answers
0 votes
The space between two hollow concentric spheres of radii $0.1\:m$ and $0.2\:m$ is under vacuum. Exchange of radiation (uniform in all directions) occurs only between the ...
0 answers
0 votes
A binary distillation column is to be designed using McCabe Thiele method. The distillate contains $90$ mol$\%$ of the more volatile component. The point of intersection ...
0 answers
0 votes
Solute $C$ is extracted in a batch process from its homogenous solution of $A$ and $C$, using solvent $B$. The combined composition of the feed and the extracting solvent...
0 answers
0 votes
At $30^{\circ}C$, the amounts of acetone adsorbed at partial pressures of $10$ and $100\:mmHg$ are $0.1$ and $0.4\:kg$ acetone/$kg$ activated carbon, respectively. Assume...